MADRIX STELLA Zubehör
MPN: IA-HW-001024
- MADRIX STELLA is a flexible 2-port network node to control LED fixtures
- Receives data over Ethernet network (Art-Net and/or Streaming ACN) to convert to DMX512 for your fixtures
- Eliminates the need for extra XLR connectors and converters: directly connect DMX512 to the device over two 3-pin, pluggable screw terminals
- Supports RDM (Remote Device Management)
- Is especially suited for solid-state projects as it can be mounted on 35-mm DIN rails or walls via the provided wall-mount brackets
- Provides flexible power options: over 5 V USB or 5 V to 24 V via pluggable screw terminal
- Drives up to 2 DMX universes over 2 ports (1024 DMX channels)
- Each port can either be configured as output or input
- Can also be used as MADRIX USB interface
- Works great with the MADRIX Software (sold separately) with quick and easy installation
- Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
- Complies with the official specifications of Art-Net and Streaming ACN and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
- 2 Ethernet ports with daisy-chain support for the data connection without using a separate network switch or router
- Automatic HTP merging for two Ethernet sources
- Useful settings for channels per universe, channel offset, channel order, and output in case of network connection loss, and more
- Built-in web page for simple on-device configuration
- 9 status LEDs, which can be turned off
- Non-conductive enclosure with IP20 and UL94 V-O flammability rating
- Fanless, noiseless, and low-energy design
- Ready within seconds after startup
- Recommended for any small or large project
- Multiple devices can be used together without problems
- The firmware can be updated for future features
- Quick start guide / technical manual available in English and German
- User manuals also available at help.madrix.com
- Made in Germany
- More information available at www.madrix.com
Connectivity:
- 2x DMX-IN/OUT (via pluggable screw terminals)
- 2x RJ45 Ethernet ports
- 1x USB port
- 1x Power (via pluggable screw terminal)
Technical Specifications:
- Supply of power: DC 5 V – 24 V, connection via 2-pin screw terminal (external power supply included) or via 5 V USB
- Power supply: AC Input: 110 – 240 V, 50/60 Hz, 0.6 A; DC Output: (3 V) / (4.5) / 5 V / 6 V / 7.5 V / 9 V / 12 V, 2.0 A max. (As provided / external)
- Power consumption: < 1.5 W during normal operation (300 mA max.)
- DMX512: 2x 512 DMX channels, input and/or output
- DMX512 ports: 2x ports (via 2x 3-pin, pluggable screw terminals)
- Ethernet: 2x RJ45, Auto MDI-X, 10/100 MBit/s (compatible with 1 GBit/s)
- USB: USB 2.0, type B port
- Case: Non-conductive, IP20, UL94 V-0 flammability rating, designed for 35 mm DIN-rails or wall mounting
- Dimensions: 92 mm x 70 mm x 45 mm (length x width x height)
- Weight: 108 g | 125 g incl. screw terminals and wall mounts
- Temperature range: -10 °C to 70 °C (Operating) | -20 °C to 85 °C (Storage)
- Relative humidity: 5 % to 80 %, non-condensing (Operating / Storage)
Package Contents:
- 1x MADRIX STELLA
- 1x Set of screw terminals (2x 3-pin and 1x 2-pin)
- 1x Power supply and world adapters kit
- 1x USB 2.0 cable (certified)
- 2x Wall-mount brackets
- 1x Quick start guide / technical manual
