MADRIX NEBULA
IA-HW-001018 / 4260263421189
Features:
- MADRIX NEBULA is a hardware interface to control your digital LED strips, LED stripes, and LED tape
- It is an advanced SPI converter and LED pixel tape driver
- Supports a wide range of LEDs: APA101 / APA102 / APA104 / APA106 / GS8207 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6120 / P9883 / SJ1221 / SK6812 / SK6822 / SM16703 / SM16716 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 / TM1814 / TM1829 / UCS1903 / UCS2903 / UCS512B3 / UCS8904 / UCS9812S / WS2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S Addressing (As of March 2019)
- Additional LED types will be supported with future firmware updates
- Drives up to 2048 RGB pixels (12 DMX universes / 6144 DMX Channels / 6144 single-color pixels / 1536 RGBW pixels) distributed equally over 2 ports
- Supports a signal frequency of up to 24 MHz
- The output protocol can be set separately for each of the 2 ports
- Directly connects to the LEDs via 4-pin, pluggable screw terminals
- Provides flexible power options: over USB (5 V) or via screw terminal (5 V to 24 V / 12 A) as well as routing through to LEDs with up to 6 A maximum load per port with various options on how to connect LEDs, power, and MADRIX NEBULA
- Receives data over Ethernet network (Art-Net and/or Streaming ACN)
- Can also be used as MADRIX USB interface
- Works great with the MADRIX Software (sold separately) with quick and easy installation
- Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
- Complies with the official protocol specifications and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
- Automatic HTP merging for two Ethernet sources
- 2 Ethernet ports with daisy-chain support for the data connection without using a separate network switch or router
- Useful settings for channels per universe, channel offset, channel order, and output in case of network connection loss, and more
- 9 status LEDs, which can be turned off
- Built-in web page for simple on-device configuration
- Can be mounted on 35-mm DIN rails or walls via the provided wall-mount brackets
- Non-conductive enclosure with IP20 and UL94 V-O flammability rating
- Fanless, noiseless, and low-energy design
- Ready within seconds after startup
- Recommended for any small or large project
- Multiple devices can be used together without problems
- The firmware can be updated for future features
- Quick start guide / technical manual available in English and German
- User manuals also available at help.madrix.com
- Made in Germany
- More information available at www.madrix.com
Connectivity:
- 2x OUT (via pluggable screw terminals)
- 2x RJ45 Ethernet ports
- 1x USB port
- 1x Power (via pluggable screw terminal)
Technical Specifications:
- Power supply: DC 5 V – 24 V, A) via 2-pin screw terminal (12 A max.), B) via 5 V USB, C) via Port 1 or 2 sourced from LEDs; 6 A max. load per port when supplying through to LEDs
- Power consumption: < 1.5 W during normal operation (300 mA max.)
- Data output: 12 x 512 channels SPI TTL (Maximum output per port: 1024 RGB LEDs / 768 RGBW LEDs / 3072 1-channel LEDs)
- Ports: 2x ports (via 2x 4-pin, pluggable screw terminals)
- Supported LEDs: APA101, APA102, APA104, APA106, GS8207, GW6201, GW6205, LPD1882S, LPD6803, LPD8806, MBI6120, P9883, SJ1221, SK6812, SK6822, SM16703, SM16716, TLS3001, TLS3008, TM1804, TM1809, TM1812, TM1814, TM1829, UCS1903, UCS2903, UCS512B3, UCS8904, UCS9812S, WS2801, WS2803, WS2811, WS2811S, WS2812, WS2812B, WS2813, WS2815, WS2818, WS2822S, WS2822S Addressing (As of March 2019 - See www.madrix.com for the latest information)
- Ethernet: 2x RJ45, Auto MDI-X, 10/100 MBit/s (compatible with 1 GBit/s)
- USB: USB 2.0, type B port
- Case: Non-conductive, IP20, UL94 V-0 flammability rating, designed for 35 mm DIN-rails or wall mounting
- Dimensions: 92 mm x 70 mm x 45 mm (length x width x height)
- Weight: 110 g | 132 g incl. screw terminals and wall mounts
- Temperature range: -10 °C to 70 °C (Operating) | -20 °C to 85 °C (Storage)
- Relative humidity: 5 % to 80 %, non-condensing (Operating / Storage)
Package Contents:
- 1x MADRIX NEBULA
- 1x Set of screw terminals (2x 4-pin and 1x 2-pin)
- 1x USB 2.0 cable (certified)
- 2x Wall-mount brackets
- 1x Quick start guide / technical manual
