Relais 2-kanal INRUSH
MPN: 90-2002
The DMX-RELAIS 2 INRUSH is designed for switching loads of several kinds.
Two potential free contacts with up to 8A switching power (165A@20ms) are available.
This relay interface is suitable for switching DC voltage or AC voltage.
A DMX FAIL function hold the relays states unchanged or switch off at a loss of DMX signal.
The following operating modes are available:
Standard 2 channel Relaisinterface
2 autonomous switching outputs will be activated as soon as the DMX value reaches the range 128-255.
FogControl
2 switching outputs controlled by a DMX-channel. Thereby output 1 is for the heating element and output 2 for the pump control. An internal timer allows the automatic fog output.
Jalousie-Control
2 mutual locked switching outputs, controlled by 2 DMX-channels. Thereby is only one relay switched on, if the DMX value reaches the range 128-255.
Impulse
If the DMX value goes in the range of 128-255, the corresponding output for 1 second turns on. Thereafter, the value must be return back below 128 to triggering an impulse again.
DMX value not 0
2 autonomous switching outputs will be activated as soon as the DMX value reaches the range 1-255.
