Relais 2-kanal UM
MPN: 90-0222
The DMX-RELAIS 2 is designed for switching loads of several kinds.
Two potential free contacts with up to 8A switching power (resistive loads) are available.
This relay interface is suitable for switching DC voltage or AC voltage.
A DMX FAIL function hold the relays states unchanged or switch off at a loss of DMX signal.
The following operating modes are available:
Standard 2 channel Relaisinterface
2 autonomous switching outputs will be activated as soon as the DMX value reaches the range 128-255.
FogControl
2 switching outputs controlled by a DMX-channel. Thereby output 1 is for the heating element and output 2 for the pump control. An internal timer allows the automatic fog output.
Jalousie-Control
2 mutual locked switching outputs, controlled by 2 DMX-channels. Thereby is only one relay switched on, if the DMX value reaches the range 128-255.
Impulse
If the DMX value goes in the range of 128-255, the corresponding output for 1 second turns on. Thereafter, the value must be return back below 128 to triggering an impulse again.
DMX value not 0
2 autonomous switching outputs will be activated as soon as the DMX value reaches the range 1-255.
